Glaze Results! And More Soon...

 Well, I'm still a bit hesitant to glaze a full load, even though I liked some of the glaze combos.  Overall though, the glazes were thin.  That is floating blue on the far right---- and while the picture isn't the best, it's dark blue and brownish.  In the middle i sburke's strong celadon with some  and on the left, burke's celadon.  I'm encouraged by all this.  And because I hope to have a dozen or so ready to sell to colleagues at a conference I attend this week, I took some water out of the glaze buckets and well, the glaze is thicker.  It just takes awhile to figure this thickness stuff out.  Any glaze thickness testing tips.  I have a hydrometer; it didn't work, because I only had 2 gallons or so of glaze mixed....  (5000 grams, I think).

 The rest of this post is a potpourri of photos...  this above shows part of the process I use when I wrote on the pottery-  that's black underglaze applied after the bisque firing.  Then I wipe it off with a sponge, a bit messy.

 Here's the full kiln load.  Put the pieces on broken kiln shelves that I bought at highwater clay during my last visit.  Guess it would help to put kiln wash on the test shelves too!   :)  I will try to remember to show close up pictures of a few of the pieces.

 Meanwhile, here are some gourds from my parent's garden drying out a bit...

 I even picked them!  Me, the city girl loved this.  I don't mind getting dirty; it's just different...

While I wish I could say the lavender is thriving (it is almost dead), here is some pottery awaiting glaze.
Tired.  Excited about unloading the next dozen of pots tomorrow morning.  Thanks for reading!