Question- Less Than One Inch?

Loaded the kin today with bowls today and loaded it so full (height-wise) that the last bowl is less than 1 inch from the top lid.  The skutt manual says leave two inches between the highest piece from the top.  I've heard differently from other potters.  Is it okay to fire it as is or is it better for me to remove that top shallow bowl leaving more space at the top?  Please, please advise.  I plan to fire the kiln tomorrow morning...

Thanks for your insight!

Oh, and the plate stackers are wonderful!  I put extra kiln posts next to them for stability; they really allow one to add more shelves and are so efficient!

First Twelve

 Here are some of the first twelve.  I'll post close-ups of these tomorrow evening hopefully.  In the meantime, here are some of my favorites- and two of these have already found new homes!  I'm so pleased about all this.

 The glaze colors of the first dozen that I fired are wonderful.  This small bowl already sold too as I took some pots to a conference I attended last week.  I recommend keeping a small box of pottery in one's car all the time!  Oh, and I REALLY like the variation in these colors.

I'll definitely use this glaze combo again.  It's the Leah Leitson's Chun Celadon glaze on the entire bowl with floating blue on the inside.
Made some bowls today and added some underglaze onto others.  There just is never enough time for pottery making these days.  At least I have it so.
If I can glaze a bunch more, I'll fire the kiln on Sunday.  Thanks for reading!

Glaze Results! And More Soon...

 Well, I'm still a bit hesitant to glaze a full load, even though I liked some of the glaze combos.  Overall though, the glazes were thin.  That is floating blue on the far right---- and while the picture isn't the best, it's dark blue and brownish.  In the middle i sburke's strong celadon with some  and on the left, burke's celadon.  I'm encouraged by all this.  And because I hope to have a dozen or so ready to sell to colleagues at a conference I attend this week, I took some water out of the glaze buckets and well, the glaze is thicker.  It just takes awhile to figure this thickness stuff out.  Any glaze thickness testing tips.  I have a hydrometer; it didn't work, because I only had 2 gallons or so of glaze mixed....  (5000 grams, I think).

 The rest of this post is a potpourri of photos...  this above shows part of the process I use when I wrote on the pottery-  that's black underglaze applied after the bisque firing.  Then I wipe it off with a sponge, a bit messy.

 Here's the full kiln load.  Put the pieces on broken kiln shelves that I bought at highwater clay during my last visit.  Guess it would help to put kiln wash on the test shelves too!   :)  I will try to remember to show close up pictures of a few of the pieces.

 Meanwhile, here are some gourds from my parent's garden drying out a bit...

 I even picked them!  Me, the city girl loved this.  I don't mind getting dirty; it's just different...

While I wish I could say the lavender is thriving (it is almost dead), here is some pottery awaiting glaze.
Tired.  Excited about unloading the next dozen of pots tomorrow morning.  Thanks for reading!

Glazing- Another Firing Around the Corner

 Kiln firing tomorrow on these pieces.  Put them on broken kiln shelves that I bought just in case they run.  Some of the glazes are a bit thin, so I double dipped them and took copious notes.  Really, really doubt they'll run.

 used these pincher things for the first time.  Once I figure out what glaze combos to use, this will take alot less time! :)

 Put different variations of 3 glazes on these.  Eager to see what they'll look like.  Saturday pm they'll be ready!  Am refiring one piece, which is something I rarely do.

 It is always inspiring to take glaze notes amidst artwork from a handsome almost 2 year old boy.  :)  My sweet nephew Garrett!  Need to post a picture of him.

Melissa--- these are the setter legs for the plate setters.  Got a set of three from highwater clays.  They're two different colors, but they're the same.  See my comments in the last post for more.  They'll be great to use with deep plates, which I'll fire in my next firing.
Tired!  Off to sleep.  More soon... Thanks for reading...